After this session, you will definitely enhance your expertise in AutoCAD designing. AutoCAD tools are no more question mark for you. Now, after becoming familiar with the tools of AutoCAD, you will find a big change in your knowledge about AutoCAD tools. Use them according to use by choosing them one by one at a time. Select the object first point and drag to the second point, click and drag in the vertical direction to show dimension. Let us look at the options in the Annotation command group. Step 2: Select the object and press Enter. Step 2: Press the Enter key to give direction and click to apply this command. Step 1: Take the offset and give base points. Step 3: Select the trimming line and click to trim it. Step 2: Select cutting edge, then press the Enter key. Step 2: Give scale factor and press Enter key. Step 1: Take scale and select object, then give base point. Step 3: Give the mirror line, then press Enter key say Yes to delete the original object or No if you don’t want to delete it. Step 2: Take mirror command and select object, then press Enter key. Step 1: It is used for making the mirror of the object. Step 2: Give direction and click to leave the copied objects. Take copy command and select object then press Enter key and give base point. Step 1: It is used for copying the object. Step 3: Give the direction and distance at which point you want to. Step 2: For moving, take the move command, select the object, press Enter key, and give the base point. Step 1: It is used for moving an object from one place to another place. Let’s take a look at some modified commands. We use this command group for creating any type of modification in the drawn objects. Step 3: Set the radius according to your requirement and left-click to complete the command. Step 2: Specify center point and give the endpoint. Step 1: Take the ellipses tool from the draw tool group. Step 4: Give radius and press Enter to complete the command. Step 3: It will ask now whether it is inscribed in a circle or circumscribed about a circle select anyone according to your requirement. Step 2: Give the center point of the pentagon. For drawing it, first, give the number of sides press Enter key. Step 1: Take the pentagon command from the draw tool group. Step 3: Then give length and press tab to give breadth according to you and press Enter. Step 2: Give the first corner from where you want to draw a rectangle. Step 1: Take a rectangle tool from the draw tool group. Step 5: We have different types of arcs here, which we use according to our requirement. Step 4: Specify the endpoint or value where you can connect the arc or end the arc. Step 3: Give the value of the second point where you want the arc. Step 2: Take the arc command and specify the start point by clicking on any point. Step 1: Arc command is used for creating an arc in different types of drawings. Step 4: We have different types of circle drawing options in the circle command you can use them according to your requirement. Step 3: Give the radius and press Enter key. Step 1: Take circle command from the Drag tool group. Step 2: The major difference between line and polyline is that the object created by line does not work as one object, but polyline makes one object, as shown in the below image. Step 1: Take polyline command to draw toolbar group and follow the same steps as we did in the line command. Step 5: For exiting from any command, press Enter or Esc key on the keyboard. I will give length 40 mm, an angle of 30 degrees and press Enter key. Step 4: Here, you can draw a line with any angle and first give length, press the tab key, and give angles. Step 3: For creating a straight-line, turn ‘Orth On’ by pressing F8 on the keyboard or click on the Orth option at the lower right corner. Step 2: Next, we will specify the first point from where we want to start our line by simply clicking on the working area and then set a length of 60 mm- then press Enter key. Step 1: Take line command from draw group tool by simply left-clicking on it. We have different groups of the tool here, such as Draw, Modify, Annotation, etc. Let’s start our introduction to tools one by one. Now the workspace has been set according to our drawing. and after applying the limit, press Enter and again ‘z’ the Enter and ‘A’ then Enter. Step 3: And setting upper limit according to my drawing suppose (100, 100). and after applying the limit, press Enter and again ‘z’ then Enter and again ‘A’ then Enter. lim, and it will automatically show the limits option then, choose it and press Enter key it will ask for the lower limit of your workspace and the upper limit one by one. Step 1: Type the first three letters of the limit command, i.e. Step 4: Your Toolbars will be restored now, and you can see them here.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |